AutomaticHelp with your watch

How to set the Seiko Prospex

Bulgarian audio · English subtitles0:46

Watch. Pause. Set.

Time, date and day on calibre 4R36 with a screw-down crown. Keep the watch in your hand. Every step has its own button — replay it as often as you need.

Seiko Prospex Diver’s, blue-green SRPH75K1
SRPH75K1

Calibre 4R36 · day and date · screw-down crown · 200 m.

Seiko 4R36 manual Published: 22.11.2026 · Video and text: Classic, checked against the official Seiko manual.

The steps in the video

  1. The crown screws down.

  2. First unscrew it by turning it anticlockwise.

  3. Pull it out to the first click.

  4. Anticlockwise changes the date, clockwise the day.

  5. Set yesterday's date.

  6. Don't change the date between 9 p.m. and 4 a.m.

  7. When the second hand is at twelve, pull the crown out to the second click and turn the hands until the date changes.

  8. Reach the exact time by taking the minutes back a little, then forward.

  9. Push the crown in and screw it down clockwise, pressing gently.

The crown screws downUnscrew it anticlockwise before anything else. At the end push it in and screw it clockwise, pressing gently, until it stops. The 200 m water resistance only applies with the crown screwed down. Set yesterday’s day as well as the date.
Read the full video transcript

How do you set the time and date on your automatic Seiko Prospex? The crown screws down. First unscrew it by turning it anticlockwise. Pull it out to the first click. Anticlockwise changes the date, clockwise the day. Set yesterday's date. Don't change the date between 9 p.m. and 4 a.m. When the second hand is at twelve, pull the crown out to the second click and turn the hands until the date changes. Reach the exact time by taking the minutes back a little, then forward. Push the crown in and screw it down clockwise, pressing gently. Done.

Translated from the Bulgarian narration.

Questions about the Seiko Prospex

Does the video work for the Seiko Turtle?

Yes. According to Seiko’s official page the Turtle SRPE93 uses calibre 4R36 with a screw-down crown — the steps are the same as in the video.

Can I swim with a Seiko Prospex?

Yes, the 200 m Diver’s models are made for swimming and diving, but only with the crown fully screwed down. Never unscrew or turn it in water.

How do I wind a Prospex that has stopped?

Unscrew the crown and turn it slowly clockwise in the normal position about 20 times. Then screw it down. Fully wound it runs for about 41 hours.

The date changes at noon. What did I do wrong?

The time is set 12 hours out. Pull the crown to the second click and turn the hands round another 12 hours.

Can't find your model?

Check the model code and calibre on the case back, or give us a call. We will tell you which guide applies to your watch.

088 4854 343